LUX H8 V3BMW 128i Installation GuideNote: Perform this installation at your own risk.Tools Required:• 10mm socket wrenchInstallation:• Open the hood•
• Pull the plastic cover up and out. There are two feet at the bottom of the cover that require the cover to be pulled up before pulling the cover of
• Once you have the back cover off, remove the halogen bulb by turning it counter-clockwise. It is the one with the yellow
• Insert the new LUX H8 into the headlight, reversing the steps to remove the old bulb. You will need to twist it clockwise until it locks into plac
• A simple way to make sure that the LUX H8 bulb is lined up properly is to look through the front headlight from the front of the car rather than fro
• Next, separate the air cleaner box from the flexible hose by gently pulling the back the flexible hose from the air cleaner box tabs.• You will now
• Disconnect the halogen bulb by turning it counter-clockwise. • Separate the halogen bulb where it joins to the wire harness.• Connect the LUX H8 bu
• The back headlight cover should just slide down into place. DO NOT FORCE IT INTO PLACE. Once the back cover is horizontal, be sure that the two fee
Comentarios a estos manuales